Touchscreen Large-Screen Water Circulation Foot Spa Bath Massager(GY-606C)
Minimalist Touch Water Circulation Foot Spa Bath Massager (GY-703D)
Intelligent Voice-Activated Atomizing Computer-Controlled Tower Heater(GY-QNS7701)
Intelligent Voice-Controlled Atomizing Electric Fireplace Heater(GY-BLS2201)
Ningbo Guanyi Electrical Technology Co.,Ltd. builds water circulation foot spa bath massagers at our 18,000㎡ production and warehousing base in Cixi City, Zhejiang. We are a Water Circulation Foot Spa Bath Massager manufacturer supplying eleven 600- and 700-series models plus a dedicated massage base to distributors, retail chains, wellness brands and private-label programs.
Every unit in this range moves water rather than simply holding it. A pump draws from the basin and returns the flow through jets or a shower head, so heat spreads through the whole water volume and the moving current carries the massage action. That loop sets our engineering priorities: pump reliability, seal integrity, stable heating and clean drainage.
The circulating models sit alongside our knob-style, computer-controlled and electric Foot Spa Bath Massager lines, and share the same PTC heating, red-light and roller platforms. Within the water circulation family, the differences are the control interface, the water delivery hardware and the basin height.
GY-606C and GY-703B pair a large LED touchscreen with the circulation loop; GY-703B adds a sterilizing cycle for hygiene-led programs.
GY-703D, GY-602 and GY-602D simplify the panel layout for value retail and clean private-label design.
GY-703E raises the basin to cover the calf; GY-703C runs a one-button automatic sequence; GY-703 uses a panoramic transparent window.
GY-606, GY-602B and GY-602C deliver water through a shower head, with single, dual and hand-held configurations.
| Model | Control interface | Signature hardware | Typical program fit |
|---|---|---|---|
| GY-606C | Large LED touchscreen | Wide console body | Flagship retail and gifting SKUs |
| GY-703B | Large touchscreen | Sterilizing module | Hygiene-led markets, shared households |
| GY-703D | Minimalist touch panel | Reduced panel layout | Value retail, clean-label branding |
| GY-703E | Touch control | Increased basin height | Deep-soak and calf coverage demand |
| GY-703C | One-button start | Fully automatic sequence | Entry automatic segment |
| GY-703 | Touch control | Panoramic transparent window | Demonstration and shelf-impact retail |
| GY-606 | Handle-integrated control | Hand-held double shower | Home-spa positioning |
| GY-602C / GY-602B | Body-mounted control | Dual or single shower head | Shower-experience SKUs, mid to premium |
| GY-602 / GY-602D | Digital touch panel | Compact body, dark gray finish | Volume retail and private label |
| Massage base | — | Circulation massage base unit | Component and after-sales supply |
Heat and water movement are managed together. PTC ceramic elements heat the basin while the pump keeps the volume in motion, which avoids the stratified warm-top, cool-bottom behaviour of a still bucket. Temperature and time are set from the panel and shown on the display throughout the soak.
Foot spas combine water and mains power in one enclosure, so the electrical build is the part of the design we protect most carefully. Heating elements and live components are isolated from the water path, with leakage protection and waterproof switching used at the wet end of the appliance.
Our Cixi site runs 10 assembly lines and 22 high-tonnage injection molding machines, supported by in-house testing equipment. Daily capacity reaches 15,000 units, finished-goods storage holds 300,000 units and annual output exceeds 2 million units, with 250 employees including more than 20 technical staff.
Quality control runs in stages rather than at a single end-of-line gate: incoming component checks, in-process inspection through assembly, and functional and safety testing before packing. We hold international certification covering CCC, CE, RoHS and BSCI, and we supply as a long-term OEM/ODM partner to more than ten well-known brands including Konka and Royalstar.
We work from the platform closest to your market rather than starting every project from a blank sheet. Appearance, structure, control layout, function set and retail packaging are all part of the customization scope, which lets a brand launch quickly while keeping tooling and unit cost under control.
Routine care centres on the water path: empty through the bottom drain, rinse the basin and roller field, and keep the intake clear of hair and residue so the pump holds its flow rate. Handles and side grips are sized for carrying a full basin, and control panels are positioned to be reached without leaning over the water.
Because the circulation assembly is a serviceable module, we supply the standalone massage base as a replacement and production component. Consumable and wear parts, panel assemblies and packaging are quoted alongside the finished unit so distributor and after-sales stocks can be planned together.
A workable proposal needs the destination market, target retail price band and the function set you want to lead with. From there we confirm the platform, panel, water delivery hardware and packaging, and return a specification sheet with the model code, ratings and certification scope for your approval.
A bubble unit injects air; a circulating unit pumps the water itself and returns it through jets or a shower head. The continuous flow keeps temperature even across the basin and gives a steadier pressure massage, which is why these models sit at the upper end of the foot spa range.
GY-602, GY-602D and GY-703D carry the simplest panels and give the widest room for brand graphics at a competitive cost. Programs targeting premium shelves usually move to the Touchscreen Large-Screen Water Circulation Foot Spa Bath Massager(GY-606C) or the sterilizing GY-703B.
Daily capacity is 15,000 units across 10 assembly lines, with finished-goods storage of 300,000 units and annual output above 2 million units. Delivery schedules are confirmed against your model mix and packaging at order stage.
Yes. The Water Circulation Foot Spa Massage Base is produced as a standalone item, so service stock can be ordered with the finished goods rather than sourced separately after launch.
Our appliance programs hold CCC, CE, RoHS and BSCI certification, and the rating label, manual language and carton information are set for the destination market during configuration. Required marks are agreed before tooling and packaging artwork are released.